コンテンツメニュー

Fujiyama Muneyuki


Development of defect inspection method using patterned area illumination : shape estimation of a defect

大島商船高等専門学校紀要 Volume 41 Page 87-92
published_at 2008-12
OS10041000012.pdf
[fulltext] 938 KB
Title
面型パターン照明による欠陥検査法の開発 : 欠陥の形状推定
Development of defect inspection method using patterned area illumination : shape estimation of a defect
Creators Sugino Tadanori
Creators Fujiyama Muneyuki
Creators Yamane Yasuo
Source Identifiers
Creator Keywords
shape estimation patterned area illumination circle pattern difference image
In the defect inspection method using patterned area illumination, a defect upon an industrial product is detected from an image emphasized by the patterned area illumination. All defects detected by the inspection method, however, is not unsuitable as a finished product. Therefore, GOOD/NG judgment which judges that the defect is good or no-good as a finished product is required frequently. Shape estimation of a defect is useful for the GOOD/NG judgment. This study proposes a method of the shape estimation. An image obtained by this inspection method is influenced by size of a pattern on the illumination, because the pattern on the image is reflected image/shadow at slope of the defect that is equal to the shape of the defect. Hence, a difference image between two images obtained by two different patterns has information of the slope. We developed the method to estimate the shape of the defect by the difference image. The utility of the method of shape estimation was confirmed through the simulation and the experiment.
Languages jpn
Resource Type departmental bulletin paper
Publishers 大島商船高等専門学校
Date Issued 2008-12
File Version Version of Record
Access Rights open access
Relations
[ISSN]0387-9232
[NCID]AN00031668